This, even if the printer worked well and printed correctly just before the message appeared. In this case, the manufacturer limits the life of the printer with a maximum number of pages to print.
If the following message appears, "End of life items or components, contact Canon Support" or "Waste ink tank is almost full or full".
Or install another cartridge if it is not recognized. Solution: remove the cartridge, then put it back. Meaning: the tank cartridge is not correctly installed. Solution: check that the hood is properly closed, that there is no gap or play, even slight. Contact your local Cartridge World store for a quote. Note: Mixed 1, Mixed 2, or Mixed 3 can be selected only when the page size is set to A4 or 8.5" x 11" (215 x 279).After reinstalling the print head and cartridges, if the fault persists, the only solution is to change the print head or change the printer.Īs an indication, the value of a Canon inkjet printhead is around £65 ex vat. When printing on Canon Photo Stickers, set the Wireless print settings as below. (4) Select the layout of the photos as below. (3) Select 'Image optimizer ON' to correct and smooth out the jagged contours when printing. (2) Select the media type for printing photos saved on a mobile phone. (1) Select the page size for printing photos saved on a mobile phone. The photos in the mobile phone can be printed according to the following settings. After finishing all settings you need, select and then press the button.Change the setting, and press the button.Select the item to set, and press the button.The Wireless print settings screen is displayed. Select 'Wireless print settings' and then press the button.Select 'Device settings' and then press the button.Display the Wireless print settings screen. Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phoneĭisplaying the Wireless Print Settings Screen and Specifying the SettingsĢ. If the photo file is over 1.8 MB in size, it may not be possible to send the file.Depending on the photo size shot on the mobile phone, the edges of the image may be cut off when performing borderless printing the margin size may change when printing with borders.Printed quality and orientation (portrait or landscape) is determined automatically according to the shot photo size.Depending on your device, data stored in a memory card may not be printed.Depending on the size of a photo, it may take a while for this machine to start printing after starting infrared communication.Due to security settings on the mobile phone, downloaded content or photos downloaded from an URL attached to an E-mail cannot be printed.We recommend printing on sticker or credit card-sized paper when the print quality on other types of paper is not fine.Depending on your device, the fine print quality option may not be available due to the restriction on the infrared transfer capacity.If it is interrupted, send the data from the mobile phone again.
During printing, be careful not to interrupt infrared communication with the machine.Do not place any obstacle between the infrared ports of the machine and mobile phone, as it will block data transmission.For the procedure to print from your mobile phone, refer to your mobile phone's instruction manual.Printing will start after receiving all data.
Select the photo to print and send the data to the machine using the infrared communication function of the mobile phone. For details, refer to your mobile phone's instruction manual. The effective range of communication with the machine depends on the mobile phone you are using. Note: The effective angle of the IrDA Port of the machine is about 10° up, left, or right from the central axis (D).